Many industrial equipment users need lubricating oil when they use it. This is because lubricating oil plays a very important role in it, which makes the equipment run normally. And for industrial high-capacity fans, do you need to add lubricating oil? There is no doubt about the answer, so why should we add lubricating oil to the fan with a large air volume? The reasons are as follows:
Why do industrial high-volume fans need to be lubricated?
Add lubricating oil to make the machine and equipment operate normally.
Because most industrial high-capacity fans are composed of motors and bearings, and the large bearings used are mainly oil-containing bearings, which are usually powder metallurgy products. The lubricating oil in the bearings is tightly wrapped in the oil holes inside the bearings. When the electric fans operate normally, the temperature of the motor will slowly rise. Because of the friction and heat generated between the shafts, the original lubricating oil will gradually increase, and consumption is exhausted, so it needs to be supplemented in time to maintain the normal operation of industrial high-capacity fans.
Adding lubricating oil can effectively improve the burnout of the motor.
Bearing plays a very important role in the motor of the industrial high-capacity fan. If the lubricating oil cannot be supplemented in time, it will affect the normal operation of the electric fan. This is because the speed of the electric fan is too low or the fan does not rotate, so dry running is easy to burn the motor, which will greatly reduce the service life of industrial high-capacity fans. At this time, it is necessary to inject some lubricating oil or sewing oil into the holes of the motor. Therefore, the manufacturer of a high-capacity industrial fan with excellent quality recommends injecting it for 1 to 2 months, which is to replace it after 3 to 4 years. When replacing it, remove the outer shell and the case cover, use light tools to scrape off the old oil inside, clean it with clean gasoline, and add some new lubricating oil.
To sum up, it is not difficult to find that the new giant industrial fan needs to add lubricating oil to avoid motor burnout and other phenomena and make them operate normally to effectively extend the service life of industrial high-capacity fans. Therefore, proper maintenance of industrial high-capacity fans and timely addition of the appropriate amounts of lubricating oil can prolong the service life of industrial high-capacity fans, which is very necessary.
Source: Gaxiaofan Press Department
Publication Date: 5/24/2020
